Hunter xc manual one station

 · X-Core - Manually Run a Single Station Turn dial to MANUAL – ONE STATION position. Station run time will flash in the display. Turn the dial clockwise to the RUN position to run the station (only the designated station will water, then the controller will return to automatic mode with no change to the previously set program).  · If you have a Hunter X Core Controller and it doesn’t come on as it should when operating manually the you could have a dodgy switch issue. Normally to run an individual station you turn the dial anti-clockwise to the ‘run single station’ indicator, then select the station an return the dial to auto-run.  · Change the dial to run and let the system turn on automatically. When you have checked the first station, you can manually shut the system off, or just let the time run out. Switch the dial back to “Manual One Station”, use the arrow buttons to select the next station, and repeat the process until you have inspected all www.doorway.ruted Reading Time: 4 mins.

Demonstration of the Hunter XC 4 station/zone irrigation controller. Stars Darren Langley of Waterwell. The Hunter XC X-Core 6-Station Outdoor Irrigation Controller is pretty easy to install and works as expected after installation. However, for some reason this timer comes pre-wired with a Volt AC Plug on the end of a power cord instead of there just being a place where you would hard wire the timer to your Romex AC wiring. Switch the dial back to "Manual One Station", use the arrow buttons to select the next station, and repeat the process until you have inspected all stations. Step 6: Finished! Once you are done setting your run times and days and have inspected each station to ensure everything is running smoothly, set the dial to "Run".

1 Manual-One Station Allows user to activate a one-time watering of a single valve System Off Allows user to discontinue all programs and watering. Also allows the user to set the programmable “rain off,” which stops watering for a period from 1 to 7 days SOLAR SYNC® Settings Allows user to program settings when using Solar Sync ET Sensor. 1 Manual-One Station – Allows user to activate a one-time watering of a single valve ALL Manual-All Stations – Allows user to activate a one-time watering of all valve stations or a few selected stations System Off – Allows user to discontinue all programs and watering Also allows the user. 1 Manual-One Station – Allows user to activate a one-time watering of a single valve. ALL Manual-All Stations – Allows user to activate a one-time watering of all valve stations or a few selected stations. System Off – Allows user to discontinue all programs and water-ing. Also allows the user to set the programmable rain off which.