Hurricane mitigation retrofit manual section 201.1

Install a secondary water resistant barrier as required by section of the HMRM. At the time of final inspection, the contractor shall provide to the inspector, the completed Inspection Affidavit attesting to the fact that the applicable requirements of the Hurricane Mitigation Retrofit Manual have been met. Download EPUB hurricane mitigation retrofit manual section PDF Ebook online PDF Download hurricane mitigation retrof. Re-nailing: All sheathing and decking shall be re- nailed per section of the Hurricane Mitigation Retrofit Manual and a secondary water barrier installed. Existing fasteners that are 8d clipped head, round head or.

HURRICANE MITIGATION RETROFITS FOR EXISTING SITE-BUILT SINGLE FAMILY RESIDENTIAL STRUCTURES Retrofits Required. Pursuant to Section , Florida Statutes, strengthening of existing site- by section (b) A secondary water barrier shall be provided as required by section Re-nailing: All sheathing and decking shall be re-nailed per section of the Hurricane Mitigation Retrofit Manual and a secondary water barrier installed. Existing fasteners that are 8d clipped head, round head or ring shank and spaced 6 in. or less o.c. may be counted. Additional fasteners shall. HURRICANE MITIGATION RETROFITS FOR RE-ROOFING Effective April 6, , the state regulations ( HB , FS and Rule 9B- I have determined the installation was done according to the Hurricane Mitigation Retrofit Manual (Based on FS and Rule FAC found at an underlayment complying with section of the.

Hurricane Mitigation Retrofits for Existing Site Built Single Family Residential Structures Effective Date October 1, except opening protection which is effective July 1, Based on HB Q. Do these requirements apply to duplexes and townhouses? A. No, they only apply to stand alone site built single family homes. Re-nailing: All sheathing and decking shall be re- nailed per section of the Hurricane Mitigation Retrofit Manual and a secondary water barrier installed. Existing fasteners that are 8d clipped head, round head or. Fastening shall be in accordance with section or as appropriate for the existing construction. 8d nails shall be a minimum of inch in diameter and shall be a minimum of /4 inch long to qualify for the provisions of this section for existing nails regardless of head shape or head diameter.